The cement-based polyvinyl chloride pipe fittings are mostly used for underground constructions in areas having high humidity and moist atmosphere. These fittings are also employed in the areas where the temperature variation from ground level is very high. Cement based pipes are generally used in homes for plumbing and in industries for drainage system. It is observed that there are a wide range of variation in performance of cement pipe fittings in cold storage area and hot water heating system due to the varying conditions prevailing in the said area.
CTS (carbon steel pipe fittings) is an abbreviation of continuous carbon steel pipe fittings, which is an amalgamation of several steel tube elements such as rod, tube and bend. Brass fitting consists of EPDM rubber gasket, anti-static ring, Mac Pak nut with break lock, and stainless steel flat screw. Insertion of stiffener is necessary in cold-formed pipe for better resistance to hot and cold temperature variations. diameters of cold formed piping are generally less than 1inch.
Cement coated pipe fittings are popularly used in different situations such as cold storage area, gas pipelines, septic tanks, water pipelines and iron ore processing plants for drainage system. They are generally galvanized and made of high resistant iron alloy for lasting pressure bearing capability. This is in addition to the standard coatings and welding. Steel pipe fittings are generally used in the water pipe connections for natural gas and liquid petroleum gas pipelines.
There are several types of threaded inserts, seal and freeze joints available for the purpose of application in piping system. The threaded one piece fittings are very effective in securing and stabilizing the joints and are very fast. Threaded joints are usually made up of galvanized steel. CTS pipe fittings are generally used for large diameter pipes and joints where durability, flexibility and low cost are most important.
The pipe fittings can also be utilized for connecting varied sized and varying lengths of PVC joints. These fittings are usually used as a threading system between two pipes of different diameter. In this process the outer diameter pipe that is joined with threaded fitting is first hammered or filed to ensure proper fit. The outer diameter pipe that is to be threaded is then inserted into the tapering fitting and the threads are fed through a spacer. When you loved this article and you would want to receive more details about https://www.castermetal.com/grey-cast-iron generously visit our website. The spacer serves as a guide for the inner diameter pipe so that both the ends are properly aligned. This procedure helps in eliminating the need for expensive and complicated tapering equipment.
With so many kinds of CTS pipe fittings, there is a proper solution to every kind of joint problem. The correct application of the fittings ensures that the joints are properly installed and do not break. Thus it ensures safety and efficiency at the same time.